Announcement

Collapse
No announcement yet.

Old model not sure

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Old model not sure

    I have an old Mercruiser 165 with straight 6 chev engine.
    We are not sure of the year but I am sure it is before 71-72

    I know this is mentioned in other posts but I just need to make sure of a few things.
    The trim rams have only ONE pipe running to them.
    The top of the leg has a lifting hole
    The back of the cavitation plate is square not rounded like new ones.
    The prop shaft is stepped not tapered where the thrust washer mounts.
    The top body of the leg (Where universals are) is curved not square.

    So just want to make sure yours will bolt up to it.

    Also do you ship to Australia?

    Regards
    Dave

  • #2
    Dave,

    Unfortunately our unit will not bolt up to the bell housings that only have one line going to the trim cylinders.

    The only way I know to make it work would be to change the complete gimbal assembly to a newer style.

    Thanks,

    Tech Support
    Brunswick Corporation is the original equipment manufacturer (OEM). Sterndrive Engineering, Inc. (or SEI) is not affiliated with the Brunswick Corporation and is not authorized to sell or service Brunswick products.

    Comment

    Working...
    X