Announcement

Collapse
No announcement yet.

Lower Seals

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Lower Seals

    With the upper and lower drive seperated, how much pressure and how long should the lower drive be tested.

  • #2
    You should test at 12-15 psi for about 10 minutes. While pressure is applied be sure to twist and rotate any moving parts.

    Tech Support
    Brunswick Corporation is the original equipment manufacturer (OEM). Sterndrive Engineering, Inc. (or SEI) is not affiliated with the Brunswick Corporation and is not authorized to sell or service Brunswick products.

    Comment


    • #3
      Seals

      Thanks for the quick reply,Great site!

      Comment

      Working...
      X