Announcement

Collapse
No announcement yet.

Gimbal ring removal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gimbal ring removal

    How do you remove the gimbal ring. I removed the two upper bolts from the gimbal ring. There does not seem to be enough clearance to remove the gimbal ring. Any ideas?

    Thanks,

    df

  • #2
    To remove the gimbal ring you will need to remove the swivel pin which is connected to the steering shaft. Do do that you need to drill two holes on the sides of the gimbal housing. Mercruiser make a special kit that has a drilling template and plugs to plug the holes back up. You will also need to get a tap to tap the holes. Any Mercruiser dealer should be able to get the kit for you.

    Tech Support
    Brunswick Corporation is the original equipment manufacturer (OEM). Sterndrive Engineering, Inc. (or SEI) is not affiliated with the Brunswick Corporation and is not authorized to sell or service Brunswick products.

    Comment

    Working...
    X