Announcement

Collapse
No announcement yet.

SE 216 has a loud whine after changing bad drive shaft

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • SE 216 has a loud whine after changing bad drive shaft

    I have a se216 that the water impeller key slot was milled to deep and allowed the key to spin on the shaft. I returned the drive and the drive shaft was changed out with bearings and a new water pump. I tried it out last night and it has a loud whine in neutral and in gear. A break in period was not needed on the repair sheet so I did run it at WOT to see if it made a difference, it did run at 5600 but has the same whine afterwards. Is this normal ? It seems tight.

    I must say the SEI service has been GREAT!

    Thanks, Tim

  • #2
    Tim.

    Please give us a call so we can research it a little more. Sometimes the builders will change out gears if they don't like the looks of it, and may forget let the warranty department know. We have ways of tracking it if we can get some more info from you. Call 813-925-7127 and ask for the Warranty department

    Tech Support

    Comment


    • #3
      Drive # 37023

      Comment

      Working...
      X