Announcement

Collapse
No announcement yet.

First fluid change...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • First fluid change...

    Hello,

    I purchased and installed a SEI drive in July of 2004. I wore the unit in according to specifications and have used the drive for about ten hours.

    When I went to change the impeller and outdrive oil to do my spring comissioning, I found quite a bit of metal filings on the lower drain plug. Is this normal fo rth efirst fluid change?

    Bob Dimond

  • #2
    Yes, metal filings are normal as long as they are very fine. There should not be any chunks.

    Tech Support
    Brunswick Corporation is the original equipment manufacturer (OEM). Sterndrive Engineering, Inc. (or SEI) is not affiliated with the Brunswick Corporation and is not authorized to sell or service Brunswick products.

    Comment

    Working...
    X