Slight vibration at 2000 rpm

[wintersp]

I just completed the first hour of the break-in on my new SE106. When I got the rpm's up to around 2000-2200, I noticed a very slight vibration. There were no unusual noises. The prop just came back from the prop shop, so I don't think it's coming from there. There was no vibration when I ran it with the old drive, so I don't think it's the engine. Is this normal during break-in?

[admin]

The gears do need to break in, so the slight vibration you feel may be from that. Just check the magnet after the break in process and change the oil.

Tech Support