After reading several threads it looks like my upper seal is bad..boat has sat for nearly 2 summers. I was wondering if I should just top off with gear oil and run it with fresh gear oil it. Will new oil rejunvate seal or do I have an issue that has to be repaired asap. Drive was new in 07. on third water pump. Boat is a 4 winns 170 horizon with the 3.0 mercruiser 140. Engine is brand new 0 hrs...cam has been run in buts thats it.
Announcement
Collapse
No announcement yet.
gear oil leak@upper&lower shifter connection
Collapse
X
-
If it was just a couple drips I might be tempted to try it, but it sounds like you should replace that shift bushing. Pretty easy to do of you can seperate the halves. Just have the drive sitting level when you pull the shifter out as it will have to go back in the same. If you do it with the drive tilted the shift crank can move out of the way and make it hard to get the shift shaft back in.
Tech Support
Comment
Comment