Announcement

Collapse
No announcement yet.

Upper Yoke Seal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Upper Yoke Seal

    About to change upper drive gear yoke seal and O-Ring. Want know if bearings must be taken off and retorqued too or can they be left on and retorqued? Also, if they have to be taken off and reused, is the torque setting 6-10 in.lbs. like new ones or 2-5 in.lbs. for used ones. Thanks. Richy

  • #2
    The proper way is to remove the bearings and then reinstall. Then set the rolling torque to 2-5 in lbs of torque.

    Tech Support

    Comment


    • #3
      Thanks for the quick response. That's what I thought, just making sure. Thanks. Richy

      Comment

      Working...
      X