If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Thinking about repowering with a M/C 350ci / 260 hp. from 305ci /198 hp does anything have to be done to the drive ? Will it take the added Hp. ?
Thanks
You just need to be sure that it is using a 1.5 upper gear ratio. You may have a 1.65 right now. A 1.5 is a much stronger gearset.
Tech Support
Brunswick Corporation is the original equipment manufacturer (OEM). Sterndrive Engineering, Inc. (or SEI) is not affiliated with the Brunswick Corporation and is not authorized to sell or service Brunswick products.
Comment