Announcement

Collapse
No announcement yet.

Seperating Upper From Lower Alpha 1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Seperating Upper From Lower Alpha 1

    I am having trouble seperating lower from upper unit. I have done it before to change the water pump and I am following the Mercruiser manual to no avail. I have verified that all of the required bolts are out. I need to seperate to install new Se-106 lower unit.
    Any suggestions?
    Thanks!
    Dick

  • #2
    Dick,
    If your certain all bolts are removed including the allen bolt located under the trim tab then you will have to try and pry the unit apart. A thin blade screwdriver should be enough to break the seal.

    Tech Support

    Comment

    Working...
    X