Announcement

Collapse
No announcement yet.

Excessive Slap

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Excessive Slap

    Since my outdrive was damaged and replaced with the SE106, I have noticed excessive slap . The boat use to ride well in rough water and has a deep V-hull. I tried adding weight to front with sandbags as well as adding a hydrofoil to the lower unit. Any suggestions or advice? Thanks!

  • #2
    Changing the outdrive should have no effect on the boats' ride. You might check the trim limit setting to see if it is correct.

    Tech Support

    Comment


    • #3
      Trim Limit Setting

      what is the proper procedure for checking the trim limit? The outdrive appears to swing all the way down when fully engaged.

      Comment


      • #4
        On the Alpha 1 you should get a measurement of 21 3/4" (+- 1/4") pin to pin center on the trim cylinders with the drive trimmed up/out.

        Tech Support

        Comment

        Working...
        X