Announcement

Collapse
No announcement yet.

Noise in unit

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Noise in unit

    I just installed a SE106 on my boat and have a vibration or a type of groaning noise at idle speed. It seems to go away with higher RPMs but is very annoying at idle in forward or reverse. The gimble bearing is new and noise was not there before drive was changed. The old drive lost a couple of teeth in upper housing and siezed up at 3000 RPM do you think maybe gimble was damaged when old unit siezed or noise is in the SE106 itself ??????

  • #2
    The noise might be the gimbal bearing or it may just be normal break-in noise. I would run the drive and see if the noise quiets down.

    Tech Support

    Comment

    Working...
    X