Announcement

Collapse
No announcement yet.

Replacing Upper Unit Oil Seal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Replacing Upper Unit Oil Seal

    I had to seperate the two halves of my 106 to replace an impeller and pump housing. When preparing to bolt them back together, I noticed a torn oil seal in the upper unit. I assume I have to take apart the upper unit gear assembly to replace that seal? Any tips? - I am mechanically inclined, but new to the guts of my outdrive...

    Thanks!

  • #2
    If it is only the lower water seal you do not have to take the unit apart. You can remove the seal and drive a new one in place.

    Tech Support

    Comment

    Working...
    X