Tweet
I'm installing a complete out drive on a 1983 sea ray 26 ft weekender with a260 hp motor. Can you tell me the correct se drive to get and the correct gear ratio to order?
-
-
You would need the SE106 drive. A 260 engine would typically use a 1.47 ratio, but since it is a 26 foot boat I would verify what ratio you have as they sometimes used a 1.32. The best way to verify the ratio is to count the teeth on the upper gears. A 1.47 gear set has 20 and 22 teeth.
Tech SupportBrunswick Corporation is the original equipment manufacturer (OEM). Sterndrive Engineering, Inc. (or SEI) is not affiliated with the Brunswick Corporation and is not authorized to sell or service Brunswick products.
Comment