If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Is there a way to tell what ratio a SE106 is without taking it apart such as serial numbers. I tried reading through the posts (all 20 pages) and didn't find anything.
Not really.the ratio could have been changed.A quicky test would be to mark the prop shaft and input shaft.turn input shaft counting number of prop shaft turns
1.5-1
1.98-1
in between can be 1.65 or 1.85
Best way is to remove the upper gears and count the teeth.
Tweet
Comment