If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have an SE 106 complete drive with about 28 hours on it. during this seasons Out-drive oil cahnge I found metal flakes in the oil. Is this normal for a new drive or am I starting to have a failure?
At 20 hours , normal break-in service requires a oil change. flakes and some metallic residue for the wear patterns during break-in are normal in most outdrives.do the oil change, and monitor the magnet for larger pieces or a metallic sheen to the oil.
Tweet
Comment