Tweet
Need new Stern Drive, Which one and what gear ratio
I have a 1993 Bayliner with the 3.0 Litre Mercruiser(120hp or 130hp I believe). I think I need the Alpha 1 Gen II replacement (SE116) but not sure what gear ratio I need. Also, I don't have the oil reservoir inside my engine housing. can someone confirm what SEI unit and gear ratio I need. The serial number for my Stern is 0F039961 if that helps. I look forward to any assistance.
-
-
You need the SE116 series ALpha One Gen 2 drive. A 1993 model might have been a 2/1 ratio. If you are purchasing a complete drive (upper and lower) you can purchase our 1.98 ratio and be OK, if you operate below 3500' elevation.
Tech Support -
Thanks. I look forward to buying this unit. Can I also buy the prop from you? What would be the part number for the prop? I am going to buy the complete unit by the way. Thanks for the help.Comment
-
You can purchase a prop from us. Contact our sales department at 813-925-7127 8AM to 5PM Monday-Friday. Please have the diameter and pitch of the prop you are looking for.
Tech SupportComment
Comment