Alpha 1 Drive will not go up

[ZEKE]

I have a Alpha 1 drive 1999 that was take out of the water Dec 08 and working fine I am ready to put the boat in the water and noticed the drive eill not go up the fluid level is fine ..Any suggestions ?

[Tech Support]

It could be many things. If the pump is clicking, then maybe the motor is bad if it doesn't spin, or the solenoid is bad. If you don't here any click, then maybe the switch is bad. You can always jump the solenoids at the pump to see if it works.
Also the trim cylinders might be stuck.

Tech Support

[ZEKE]

Thanks i will try