Pre-'91 OMC Shooter prop on SE 300?

[stimpy451]

Everything I've read (including post and reply on proper thrust washer) seems to indicate that there is no difference between OMC pre- and post-'91 props, only thrust washers to accommodate the larger post-91 prop shaft. There is no way my pre-91 prop is going to fit. I machined the recommended thrust washer to fit my prop hub and it is still sitting too far back on the shaft.

This is one of the things I wish I had known prior to going this route! I know it is not SEI's problem but it might help others to know that they're in for a new prop (or hub, if possible) if using a 306 on a pre-'91 OMC V6.

[rocketw31]

I run both a 27 pitch shooter and a 29 pitch shooter on my SE 306 lower unit on an 89 Evinrude 200XP with no problems what so ever.