Announcement

Collapse
No announcement yet.

Stuck impeller on SE106

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Stuck impeller on SE106

    I am trying to replace the water pump on my se106. The impeller will not come loose it will move about 1/8 inch up but just locks up and I cannot remove it. Ideas?

  • #2
    pump

    There is a slight burr on the shaft just above the impeller rubber. Try gently tapping with a chisel to raise it up and off, then clean up the burr.Otherwise Dremel it off.

    Comment

    Working...
    X