I came over today (4-14-08) and purchased a new complete SE106 and when I got home and installed it I found the lower will not go into reverse.
My old drive had no issues going into gear so I began by looking at the brass shift shaft when the shifter is moved. I find it will only turn one direction (left when facing the rear of the boat) which is forward gear. When you attempt to put it in reverse it stops in the middle (pointing forward) and will not turn clockwise beyond straight forward.
Please advise me on what may be the issue.
I've tried it both with the engine running and off and it still refuses to turn clockwise beyond straight forward.
Thank you
Jesse
My old drive had no issues going into gear so I began by looking at the brass shift shaft when the shifter is moved. I find it will only turn one direction (left when facing the rear of the boat) which is forward gear. When you attempt to put it in reverse it stops in the middle (pointing forward) and will not turn clockwise beyond straight forward.
Please advise me on what may be the issue.
I've tried it both with the engine running and off and it still refuses to turn clockwise beyond straight forward.
Thank you
Jesse
Comment