Zinc kit and locations

[SabsolutR]

What Anode kit should i purchase and where are the locations on this unit?
Thank You

[Bt Doctur]

You will have to reveal WHAT unit for the correct answer.

[calin]

what if he has an alpha 1 gen 1?

[Bt Doctur]

fresh or salt makes a difference,
Alpha1 trim tab, transom annode bolts, zinc block under mer-cathode ,trim cyl. shafts Series 1 optional,trim cyl. end caps, Horseshoe zinc GEN II

[SabsolutR]

Zinc

Its for the SE106...isnt that the drive this thread is for?

The boat is in brackish water and I have trim tabs.

I read what you typed above, but thats in greek to me...can you go into more detail.
thanks

[Tech Support]

Basically you have one anode at the bottom of the gimble housing at each side. There is another anode where the trim lines hook up on the gimbal housing. The trim cylinders may also have an option for a u shaped anode on the endcap. There is also an anode above the prop that usually looks like a fin, but could be a flat plate if needed for prop clearance. The last anode is also optional if you have a newer unit, and that would be behind the prop mounted to the bearing carrier.

Tech Support