Announcement

Collapse
No announcement yet.

se106 trim tab

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • se106 trim tab

    I just finished mating the lower and upper units of the SE106 by following the provided instructions. The last instruction states "Install the front nut and the trim tab."

    I suspect the instructions assume that the trim tab was to be provided by the customer, either reusing an old trim tab or purchasing a new one. I would like to purchase a new one from Sterndrive Engineering, but cannot find one that is specifically identified as being for the SE106. Which product should I order?

  • #2
    If you do a search on our store for 90-106-05k you will find the trim tab anode kit. You can also purchase one at your local marine shop.

    Tech Support

    Comment


    • #3
      Depending on the prop size and thus clearance, you will either use a standard size trim tab, a smaller "racing" trim tab, or a flat plate. Depending on water type, you will either use a zinc (salt) aluminum (salt or fresh) or magnesium (best for fresh water, but fresh water only)
      Island

      Comment

      Working...
      X